Select interface

The T3Ster equipment can be connected to the host computer through different interface options. With this item of the System menu one can invoke a control panel in which available interface options (the ones for which an active device driver is reported by the operating system) can be selected by radio buttons. The currently available options are:

• MicReD's 8255-based high speed parallel interface card (card needs to be installed in a free ISA slot)
• LPT port of your computer (Centronics interface box needs to be attached to the rear of the Main System Unit).

For details on hardware interface setup options, refere to chapter 6 of the T3Ster Hardware Reference Guide. Device driver installation details are described in section 3 of this manual.